(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:30 19/5/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน พฤษภาคม 2567 | Notice holiday in May 2024 > คลิก
Search Results “heater wire”
Product
Configure
Category
-
- Crimp Terminals (657)
- Magnetic Contactors (63)
- Soldering Irons (49)
- Solder Wick Blotters (48)
- Cartridge Heaters (39)
- Resin Tube Options (37)
- Vacuum Generators, Vacuum Ejectors (29)
- Heating Equipment (21)
- Rubber Heaters (18)
- Screw Fittings, Screw-In Type Flanges (15)
- Switches (Options, Others) (14)
- Temperature Controllers (12)
- Incubators and Dryers (11)
- Temperature Conditioning Components (10)
- Sheathed Heaters for Liquid Heating (10)
- Other Heaters (8)
- Cartridge Heaters (6)
- Vacuum Valves (5)
- Overload Relays (4)
- Plate Heaters (4)
- Air Conditioner Ducting Supplies (4)
- Current Feedthrough, Lead-in Terminals (4)
- Wrapping Type Heaters (4)
- Pliers/Nippers/Pincers (4)
- Soldering Irons (4)
- Zip Ties (3)
- Sheathed Heaters for Air Heating (3)
- Radiant Heaters (3)
- SSR (2)
- Alarms/Buzzers (2)
- Tips (2)
- Nylon Connectors (2)
- Insulation Wires for Electric / Electronic / Communication Equipment (2)
- Window Frames (2)
- Board Heaters / Heat Sinks (2)
- Transformers (2)
- Temperature Safety Measure Components (2)
- Nippers (Pneumatic Tools) (2)
- Metal Tapes (2)
- Sealers (2)
- Other Relays (1)
- Circuit Protectors (1)
- Square Connectors (1)
- Contact Pins (1)
- Zip Tie Fixtures/Options (1)
- Control Boxes (1)
- Drawing Holders (1)
- Heating Items (1)
- Thin Nozzle Heater for Molding Machine (1)
- Cleaner for Mold (1)
- Current Sensors (1)
- Micro Switches (1)
- Hot Air Generators (1)
- DIY Supplies (1)
- Heating Supplies (1)
- Electrical/Electronic-Use Tapes (1)
Lead Time / Manufacturer / CAD Data Type
-
Days to Ship
- All
- Same day
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- Others
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is a cartridge heater with a flange attached to the end. The heater can be easily secured with M4 bolts. It prevents the cartridge heater from falling out of the device.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Cartridge Heaters-Selectable/Configurable L&W
MISUMI
Cartridge Heaters-Selectable/Configurable L&W
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter Minimum/Maximum (mm.) : 3.1 and 18.95
- Length Minimum/Maximum (mm.) : 30 and 300
- Voltage(V) : 100 and 200
- Material:
Heater - SUS304 Equivalent
Lead wire - Copper wire or Nickel wire
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
Same day
-
You can add up to 6 items per a category to the compare list.
Band Heaters-One Piece/Two Piece
MISUMI
The band heater is a low profile cylinder heater and coated with stainless steel plate, and its nichrome wire is insulated with the heat-resistant mica board.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Rubber Heaters-Square Type/With Thermostat
MISUMI
This is a rubber heater, square thermostat type. [Maximum Operating Temperature]220°C
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is a quartz glass tube heater. [Material of Exothermic Part]Quartz glass [Infrared Type] Quartz glass tube
10 Day(s)
-
Economy seriesYou can add up to 6 items per a category to the compare list.
Cartridge Heaters Internal Wiring Type
Cartridge Heaters Internal Wiring Type
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10 and 12
- Length (mm.) : 60, 80, 100 and 150
- Voltage(V) : 220
- Material:
Heater - SUS321
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Far Infrared Ceramic Plate Heaters/Far Infrared Plate Heaters
MISUMI
This is a far-infrared heater. [Material of Exothermic Part]Ceramic [Voltage (V)] 200
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters - Flex-Resistant
MISUMI
Cartridge Heaters - Flex-Resistant
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 400
- Diameter (mm.) : 8, 10 and 12
- Length (mm.) : 60, 80, 100 and 150
- Voltage(V) : 100 and 200
- Material:
Heater - SUS321
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-Flexible Hose/No Flange/Flange Shape A/Flange Shape C
MISUMI
Cartridge Heaters-Flexible Hose/No Flange/Flange Shape A/Flange Shape C
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 9.42, 10, 12 and 12.6
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100 ,110, 200 and 220
- Material:
Heater and Flange - SUS304
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Rubber Heaters-Round Type/Standard
MISUMI
[Features]·Round rubber heater with a maximum operating temperature of 200 to 250°C.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MISUMI
This is a plate heater. [Applications]Metal heating [Maximum Operating Temperature] 300°C
Same day
-
You can add up to 6 items per a category to the compare list.
YAGAMI
[Features]
·A belt-shaped electric heater made of silicon rubber material with good workability.
·It is highly flexible and fits well on the heating surface for effective heat transfer.
·Recommended for preventing condensation and freezing.
Same day
-
You can add up to 6 items per a category to the compare list.
KASHIMA
A far infrared radiant surface type heater made by Vulkan of England. Heats and dries objects quickly and uniformly during non-contact heat application.
Long-life as the heating element (nichrome wire) is molded into a ceramic insulator to prevent oxidation of the heating element.
This heater is more lightweight with excess ceramic material removed, increases and decreases heat more quickly, and has faster response than other companies' models.
A highly efficient and very clean ceramic heater.
Embedding the temperature sensor enables highly accurate temperature management.
The temperature distribution can be controlled accurately by arranging into a matrix and controlling the temperature of each heater.
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Rubber Heaters-Square Type/Standard Selectable
MISUMI
[Features]·Rectangular rubber heater with a maximum operating temperature of 200 to 250°C.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-Lead Wire Selectable/Flange Shape A
MISUMI
Cartridge Heaters-Lead Wire Selectable/Flange Shape A
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10, and 12
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100 and 200
- Material:
Heater : SUS304
Flange : Stainless Steel
Terminal : Copper (Tin plating)
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is a Silicone belt heater. [Material]Heating element: Nichrome wire [Coating Material] Silicone rubber [Lead] Silicone rubber coating, tin-plated annealed copper wire
7 Day(s)
-
Economy seriesYou can add up to 6 items per a category to the compare list.
Cartridge Heaters With Sensor
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10 and 12
- Length (mm.) : 50, 80, 120 and 150
- Voltage(V) : 220
- Material:
Heater - SUS321
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
Same day
-
Economy seriesYou can add up to 6 items per a category to the compare list.
Cartridge Heaters L Type
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 6, 8 and 10
- Length (mm.) : 50, 80 and 100
- Voltage(V) : 220 and 380
- Material:
Heater - SUS321
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
Same day
-
Economy seriesYou can add up to 6 items per a category to the compare list.
Cartridge Heaters Standard Type
Cartridge Heaters Standard Type
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 5, 6, 6.25, 8, 10 and 12
- Length (mm.) : 30, 40, 50, 60, 80, 100 and 150
- Voltage(V) : 220
- Material:
Heater - SUS321
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
Same day
-
Economy seriesYou can add up to 6 items per a category to the compare list.
Cartridge Heaters Flange Type
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 6, 8, 10, 12 and 16
- Length (mm.) : 50, 100, 150 and 180
- Voltage(V) : 220
- Material:
Heater : SUS321
Flange - SUS304
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
Same day
-
You can add up to 6 items per a category to the compare list.
KASHIMA
A micro-ceramic heater is a heater in which a tungsten resistor (heating element) is bonded with a ceramic sheet that has excellent heat resistance and insulation.
[Features]
・ Since it is a planar heater, it heats the object to be heated evenly.
・ Due to the high watt density design, it heats up rapidly.
・ The temperature rises to approx. 500°C.
・ Uses ceramic with excellent oxidation resistance and chemical resistance, and has a long lifespan.
・ As it is compact, it helps space saving.
・ Small and ultra-thin (approx. 1.27 mm) flat heater that can be heated in a small space.
・ A heater with a quick temperature rise and good response.
[Applications]
・ It can also be used for solid heating.
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SHINOHARA ELECTRIC
For preventing dew and moisture from collecting on the inside of panels. - Covers not included.
[Features]
- Heater element is made from a chrome-plated steel wire wrapped around a mica sheet, then sealed airtight by a galvanized steel or stainless steel plate. It does not come into contact with the air, preventing oxidation or corrosion.
- Once installed, only periodic inspection is required.
- Heater element is fixed and completely insulated, ensuring it is safe and can handle heavy vibration.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
KASHIMA
A silicone rubber heater with a heating element (nichrome wire) sandwiched between silicone rubber with excellent flexibility that can be fitted to cylindrical, tubular and conical heated objects.
[Features/Notes]
· 1.5 mm thin heating sheet.
· Max. operating temperature is 200°C.
· Install so there are no gaps between the heated material and silicone rubber heater.
Any gaps could result in premature disconnection.
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
KASHIMA
[Features]
・ Since temperature adjustment is not required due to self-control, both space and lifespan are improved.
・ It is safe and economical because the self-control function suppresses abnormal heat generation of the heater and also suppresses wasteful power consumption.
・ When it reaches a certain temperature (Curie temperature), it maintains that temperature and prevents overheating.
・ It is compact and requires a small installation space without the need for external control functions.
・ Although the PTC heater is a self-control type heater, the manufacturer recommends using a thermal fuse, thermostat, etc., as a safety protection measure.
[Applications]
・ It can be used in various applications in a wide range of industries such as beauty, medical care, construction machinery, and home appliances.
・ For freezing / solidification prevention.
・ For resin processing.
・ For solid heating.
・ For drying.
・ For chemical / liquid heating.
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is a compact ceramic heater. [Applications]Metal heating [Maximum Operating Temperature (°C)] 200
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heater for High Temperatures TYPE B
KASHIMA
A cartridge heater made by the US company RAMA. High-temperature cartridge heater widely used for heating molds.
TYPE B is a fully flexible lead wire type.
[Features]
· Bending-resistant type makes it easy to handle lead wires, even in narrow spaces.
· Lead wire and heating element are connected within the heater.
· More resistant to lead wire movement or bending than A types.
[Notes]
· Max. Operating Temperature: 871°C (Heater Surface Temperature)
· Lead wire heat resistance temperature is 200°C.
· The vicinity of the lead wire exit port should be kept at or below 130°C.
· We recommend drilling holes to align the actual product, because malfunctioning heat exchange leading to abnormal heat generation that will shorten operation life occurs when the clearance between the mold hole inner diameter and heater outer diameter increases on heaters with a power density of 20 W/cm² or more.
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Lead Wires For Heater【10 Pieces Per Package】
MISUMI
■Features
・Can be used to extend the heater lead wire.
・This is a pack of 10 pieces.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
SAKAGUCHI
A thin, light, and flexible rubber heater in which both faces of the heating element are attached with a heat-resistant insulation layer (silicone rubber).
[Features]
· Extremely thin with a maximum thickness of 1 mm, resulting in a fast temperature increase.
· Heater with fast heat diffusion, less uneven heating and extremely high heating efficiency.
· Uses a heating element body made by accurate power density design and precise etching technology.
· Multiple heater circuits can be contained on the same heater surface.
· Design freedom allows, for example, to set a temperature gradient according to the application.
[Applications]
· Ideal for heat insulation of medical equipment such as syringes and devices for maintaining blood at a certain temperature, infrared photography equipment and measuring devices.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-Lead Wire Protection Type with Knurled Flange/Flange Shape A/Flange Shape B
MISUMI
Cartridge Heaters-Lead Wire Protection Type with Knurled Flange/Flange Shape A/Flange Shape B
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10, and 12
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100 and 200
- Material:
Heater and Knurled: SUS304
Flange - Stainless Steel
Terminal - Copper (Tin plating)
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
RS Pro Nozzle heaters are designed with the highest quality materials used for optimal performance. The heaters are most commonly used in the plastic industry but are also suitable to use in applications of up to 1000°F. • High temperature oxidation resistance metal sheath• Highest grade mica insulation provides excellent electrical insulation at high temperature and is resistant to moisture• Clamping band is low thermal expansion steel construction designed to maintain clamping pressure at elevated temperatures• Nickel/Chromium resistance wire evenly wound for uniform heat distribution and reliable accuracy• Standard 10 in fibreglass lead wire
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-Heating Length Configurable
MISUMI
Cartridge Heaters-Heating Length Configurable
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Special Feature: The heating length can be configured between 40 to 590 and the minimum length can be increased by increments 1 mm.
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10, and 12
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100 and 200
- Material:
Heater - SUS304
Terminal - Copper (Tin plating)
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-Uniform Heating Type
MISUMI
Cartridge Heaters-Uniform Heating Type
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10 and 12
- Length (mm.) :The size is configurable between 150 to 300 mm, and the minimum length can be increased by increments 10 mm.
- Voltage(V) : 100 and 200
- Material:
Heater - SUS304
Terminal - Copper (Tin Plating)
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
SHINOHARA ELECTRIC
Can be used as a heater to prevent dew and moisture inside the panel. Workability is good due to terminal block.
[Features]
· Easy to work with due to inclusion of terminal block in the wire connecting element.
· Terminal block is made of polycarbonate rated to 600V / 25A.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is a plug heater for air heating. [Power Density]2.5 W/cm2
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
SAKAGUCHI
A cartridge heater from the US company WATLOW. Maximum operating temperature of 760°C. A wide range of heater diameters are available, from 1/8 inch (3.1 mm) to 3/4 inch (18.95 mm).
[Features]
· Carefully selected heating wires, insulation materials, and sheath materials are arranged using a unique method to minimize temperature differences between the heating element and sheath surface.
· A heater with high watt density and excellent thermal efficiency.
· Operating temperature of 760° CMAX.
· Mechanically and thermally robust for a long service life.
· Fast delivery with more than 500 types in stock.
· Custom order items can also be delivered in a short time.
· Support for UL/CSA/CE standards can be provided upon request.
2 Day(s)
-
You can add up to 6 items per a category to the compare list.
SAKAGUCHI
The sheath material for water heating has a nickel plated finish.
[Features]
・ It can be used simply by providing an insertion port such as on the side of the water tank, and inserting it, and screwing it in.
・ An economical heater that is easy to install and requires little space.
・ A heater that directly heats the liquid in the tank.
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025SAKAGUCHI
Thin and soft silicone rubber heater.
[Features]
· It has excellent mechanical strength and flexibility, and can fully respond to very small bending parts.
· Can be used for even very small bends.
· It has excellent mechanical strength and flexibility by using a resistance wire in which glass fiber is spirally wound as a heating element.
· Made of a silicone rubber material with excellent moisture and chemical resistance.
· Also, the silicone rubber is glass fiber reinforced for excellent insulation performance.
[Applications]
· Used to heat the metal plate surfaces in medical equipment and analyzers.
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-L-Shaped/Knurled/Flanged
MISUMI
Cartridge Heaters-L-Shaped/Knurled/Flanged
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10, and 12
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100 and 200
- Material:
Heater - SUS304
Collar - SUS304
Terminal - Copper (Tin plating)
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-Stranded Wire/No Flange/Flange Shape A/Flange Shape B
MISUMI
Cartridge Heaters-Stranded Wire/No Flange/Flange Shape A/Flange Shape B
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10, 12 and 14
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100 and 200
- Material:
Heater - SUS304
Terminal - Copper (Tin Plating)
Flange - Stainless steel
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Rubber Heaters Items - Adhesives for Rubber Heater
MISUMI
[Features]·Rubber heater adhesive used to bond Silicone rubber.
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-Configurable L, W and F
MISUMI
Cartridge Heaters-Configurable L, W and F
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 6, 8, 10, 12, 14, 16 and 18
- Diameter (inch.) : 1/4, 3/8, 1/2, 5/8 and 3/4
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 5 mm.
- Voltage(V) : 100 ,110, 200 and 220
- Material:
Heater - SUS304 Equivalent
Terminal - Copper (Tin plating)
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Cartridge Heaters Imperial Sizes
RS Pro
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap suitable for high vibration applicationsDeep holes in ceramic cap prevents fraying of lead when bentNickel-chromium resistance wire for maximum heater lifeTIG welded end disc prevents contamination and moisture absorptionFiberglass lead wire insulation10" Lead wires
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Cartridge Heaters Metric Sizes
RS Pro
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap suitable for high vibration applicationsDeep holes in ceramic cap prevents fraying of lead when bentNickel-chromium resistance wire for maximum heater lifeTIG welded end disc prevents contamination and moisture absorptionFiberglass lead wire insulation10" Lead wires
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heater for High Temperatures TYPE A
KASHIMA
A cartridge heater made by the US company RAMA.High-temperature cartridge heater widely used for heating molds.For use at high temperatures, Incoloy is used for the sheath material, an Incoloy end disc is welded to the cartridge heater terminal, and a LavaSeal (special lava seal) is provided on the opening. It has been manufactured in a strictly controlled production process.Continuous sheath surface temperatures of up to 871°C can be maintained in addition to accurate and uniform heating at medium and low temperatures.A wide range of heater diameters are available, from φ6.25 to φ18.95. 332 types are consistently in stock.Customized items of different sizes and shapes can be manufactured within a short delivery time.UL standard products are also available with short delivery times.
[Notes]
· Max. Operating Temperature: 871°C (Heater Surface Temperature)
· Lead wire heat resistance temperature is 200°C.
· The vicinity of the lead wire exit port should be kept at or below 130°C.
· We recommend drilling holes to align the actual product, because malfunctioning heat exchange leading to abnormal heat generation that will shorten operation life occurs when the clearance between the mold hole inner diameter and heater outer diameter increases on heaters with a power density of 20 W/cm² or more.
· Note that the insulating tube easily comes off.
· Do not use the heater while empty in open air. There is a risk of breaking or catching fire due to abnormal heat generation if used with all or part of the heater protruding from the object being heated.
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Rubber Heaters-Square Type/Flat Type
MISUMI
The lead wire holding sheet escapes from the heat generating part, making it easy to use by sandwiching the lead wire.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
RS Pro strip heaters are economical heat sources, suitable for providing heat to flat surfaces. The heaters feature a high temperature oxidation metal sheath and high grade mica insulation resistant to moisture and high temperatures. Nickel/Chromium resistance wire is evenly wound to provide uniform and reliable heat distribution. • Fibreglass lead wires• Leads come out of same end of the heater• Leads rated to 850°F• Heater provided in variety of lengths and wattages
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-L-Shaped/Break Resistant, Internal Connection)
MISUMI
Cartridge Heaters-L-Shaped/Break Resistant, Internal Connection)
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 6, 8, 10, and 12
- Length (mm.) :The size is configurable between 50 to 600 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100 and 200
- Material:
Heater - SUS304
Collar - SUS304
Terminal - Copper (Tin plating)
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
HAKKO ELECTRIC
[Features]
· The high nickel alloy used for the heat-generating wire provides excellent electrical insulation, with particularly stable insulation performance maintained at high temperatures.
[Applications]
· Die heating for heating plate / mold.
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Silicone Rubber Heater (SR Type)
THREE HIGH
A thin rubber heater with a thickness of 1.5 mm, made from silicone rubber material.
[Features]
· Flexible heating element body unlike the metal heaters.
· Support is available for a wide range of orders such as drilling, R processing and attach/detach processing. Manufacturable irrespective of quantity.
· Uses a glass cloth calendar processed sheet.
· Can be designed in any shape including round, irregular, with holes or R processed. Superior thermal responsiveness. 1.5 mm thinness.
· Just perfect for any application.
· Soft material used for the heater.
[Applications]
· Used in various industries because of its long service lifespan even if used continuously at 200°C and customizable design.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ribbon Heaters-Standard Type/Fluorine Coating Type)
MISUMI
[Features]·Band-shaped heater that can be easily attached to pipes and tanks.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sheathed Heaters for Liquid Heating-Straight/One Terminal
MISUMI
This is a tubular heater for liquid heating, straight single terminal type.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-With Thermal Sensor at the Edge/With Thermal Sensor at the Center
MISUMI
[Features]·This is a cartridge heater with built-in Type K thermocouple. The heater and temperature sensor are integrated for space saving. The heater itself is prevented from overheating and the temperature can be accurately controlled.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Sheathed Heaters for Liquid Heating-Standard
MISUMI
For a plug type, you can choose from models for water heating/oil heating, and for a flange type, from models for water heating.
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Thin Nozzle Heater for Molding Machine
MISUMI
[Features]
- The flat lead cover is kept low so that the outer periphery does not interfere with the nozzle heater of the molding machine.
・Since the heating element and band are integrated, it prevents short circuits due to misalignment of the band and is easy to install.
Same day
-
You can add up to 6 items per a category to the compare list.
Immersion Type Pipe Heater for Water
SAKAGUCHI
A sheath heater for liquid heating that can be simply immersed in the liquid and turned on.
[Features]
· The sheath material is made of nickel plating copper pipe and the position of the hook can be moved and rotated.
· Since it can be directly immersed into water, heating is done efficiently.
· Nickel plating copper pipe sheath material is used for the WNH type.
· The position of the hook can be moved, rotated and fixed according to the container.
[Applications]
· It can be used to heat and warm water or to use it as a dummy resistor while heating water.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Air Sheathed Heaters-Configurable/U Type/S Type
MISUMI
This is a heater with fins for air heating, free specification type. [Material]Element: SUS321, bushing: SUS304 (M16 × 1.5)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters Items/Mounting Bolts
MISUMI
Cartridge Heaters Items/Mounting Bolts
The mounting bolt is used to secure the cartridge heater from the side face when tightening is inadequate. It provides a wide range of sizes to choose from.
[Feature]
- Inner Diameter Minimum/Maximum (mm.) : 5.1 and 18.1
- Overall Length (mm.) : 18, 20, 25 and 27
- Thread Size R(PT) : 1/8, 1/4, 3/8, 1/2 and 3/4
- Material : SUS303
[Application]
The mounting bolt is used to secure the cartridge heater in a machine.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters Items/Hot Plates
MISUMI
Cartridge Heaters Items/Hot Plates
The hot plate for cartridge heaters comes with a hole for the sensor and a heater slot. It provides a wide range of sizes to choose from.
[Feature]
- Plate Types : No Tapped holes/ with Tapped holes
- Plate Size (mm.) : Configurable 3 Width (A) x Length (B) X Thickness (T)
Width (A) (mm.): can be configured between 50 and 200 mm, and the minimum length can be increased in increments of 1 mm.
Length (B) (mm.): can be configured between 50 and 200 mm, and the minimum length can be increased in increments of 1 mm.
Thickness (T) (mm.): can be configured between 12 and 30 mm, and the minimum length can be increased in increments of 1 mm.
- Heater Holes Diameter (mm.) : 5, 6 , 8, 10, 12, 14 ,16 and 18
- Numer of Heater Holes : can be configured between 1 to 10
- Material:
No Tapped holes - A5052
With Tapped holes - SUS303
[Application]
The hot plates are used to hold the cartridge heaters in a machine.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MISUMI
Band thickness H=30~50mm is in stock!! Can be shipped on the same day!
φ16 and φ40 can be used with standard nozzles.
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters-High Temperature/No Flange/Flange Shape B/Flange Shape C
MISUMI
Cartridge Heaters-High Temperature/No Flange/Flange Shape B/Flange Shape C
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 900
- Diameter (mm.) : 8, 10, and 12
- Length (mm.) :The size is configurable between 50 to 300 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100, 110, 200 and 220
- Material:
Heater - Incolloy
Flange - SUS304
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters Items - Thermal Conductive Grease
MISUMI
Cartridge Heaters Items - Thermal Conductive Grease
By applying thermal conductive grease to a cartridge heater, the effective transfer of heat to metal plates can be achieved.
[Features]
- Heat Resistance Temperature (℃) : 50
- Condition of thermal conduction : 0.96 W/m-K
- Color : White
- Main Components: Silicon
- Volume: 50 g
[Application]
By applying thermal conductive grease to a cartridge heater before put the cartridge heater in the hole.
Same day
-
You can add up to 6 items per a category to the compare list.
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Cartridge Heaters-High Temperature/No Flange/Flange Shape A/Flange Shape B
MISUMI
Cartridge heater with higher power density and superior thermal efficiency to conventional heaters. Sheath part, made of incoloy alloy that is excellent in heat resistance, is robust and has long lifespan.
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters Items - Anti-Seize Agent
MISUMI
[Features]·It comes with work gloves. ·When applied to the cartridge heater, it fills the gap and prevents sticking due to seizure.
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
Cartridge Heaters-No Protective Spring/With Protective Spring/Flange Shape A/Flange Shape B/Flange Shape C
These cartridge heaters are used in various industrial applications to provide localized heat to the equipment. They provide a wide range of sizes to choose from
[Feature]
- Maximum Operating Temperature (°C) : 600
- Diameter (mm.) : 8, 10, 12 and 16
- Length (mm.) :The size is configurable between 50 to 400 mm, and the minimum length can be increased by increments 1 mm.
- Voltage(V) : 100-110 and 200-220
- Material:
Heater - SUS304
Flange - Stainless steel
[Application]
These cartridge heaters are often used in industrial processes such as plastic molding, packaging and sealing.
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Air Sheathed Heaters-Standard/U Type/S Type/M Type
MISUMI
This is a heater with fins for air heating. [Material]Element: SUS304, bushing: SUS304
Same day
-
You can add up to 6 items per a category to the compare list.
Sheathed Heaters for Liquid Heating-With Overheating Prevention
MISUMI
Built-in bimetal thermostat prevents unexpected overheating.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sheathed Heaters for Liquid Heating-U Shape/M Shape
MISUMI
[Features]·U-shaped and M type fixed type. It can be used for heating water.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Connecting Parts for Heaters/Welding Sockets/PF Threaded
MISUMI
Socket for attaching a plug-type tubular heater for heating liquid to a water tank.
Same day
-
You can add up to 6 items per a category to the compare list.
Cartridge Heaters -L Dimension・W Dimension・Flange Selection・With Lead Protection Cover-
MISUMI
Sales are increasing!
[Features]
- Comes with a protective cover for the lead wire to prevent wire breakage.
・You can specify the size, wattage, voltage, and flange shape!
[For those who don't have the size they want!!!]
We can make it for you. Please request a quote first.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Micro Heaters-One Terminal Type/Both Terminal Type
MISUMI
Because it is an extremely thin tube, it can be installed in narrow and complicated places. Enhanced flexibility enables you to change shapes as you want.
Same day
-
You can add up to 6 items per a category to the compare list.
Ceramic heater soldering iron "Hakko DASH"
HAKKO CORPORATION
Entry-level ceramic heater soldering iron.
[Features]
·Ideal for first-time electronic circuit manufacturers.
·Quick to start up and improved workability. (Approximately triple that of nichrome heaters)
Product lineup features three types of tip shape.
340°C in approximately 90 seconds.
·15 mm slim grip.
[Applications]
·Ideal for soldering work.
·Ideal for electronic circuit manufacturing.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
TOKYO TECHNOLOG
[Features]
· No worry of electrical leakage due to humidity since the heating element is covered by 100% silicon.
· High heat resistant temperature, also has excellent durability, weather resistance and chemical resistance. Flexible, easy to handle and roll up.
· Both the top and bottom of the center part of the ribbon are concave and rubbery so the surface is not slippery and can be tightly wrapped.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Heater Disconnection Detector K2CU
OMRON
A K2CU heater burnout alarm.
[Features]
· Detects burnouts from small to large capacity heaters.
· Detects heater burnout in molding and packing machinery, etc., and then outputs an alarm.
· Boasts a high level of detection accuracy, enabling detection of single burned out wires, even when using multiple heaters.
· Can be used with a wide range of heaters; from small to large capacity types.
· A single K2CU-F large capacity integrated CT unit can be used for both single and triple-phase heaters.
· The compensation function for fluctuations in voltage
· means that false alarms will not occur due to fluctuations in heater current caused by fluctuations in the voltage from the power supply, ensuring that alarms only occur when applicable.
Same day
-
You can add up to 6 items per a category to the compare list.
Ceramic Heater Solder Iron FX-600 Series
HAKKO CORPORATION
[Features]
· The temperature can be adjusted between 200°C and 500°C.
· More than 30 types of replacement tips.
· Ideal for soldering to IC/LED printed circuit boards, etc.
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Transformer / Replacement Heater For Heat Nippers
MUROMOTO TEKKO
Replacement heater for heat nippers.
[Features]
·Spare parts for consumables
[Applications]
·Replacement heater for HT120, HT130, HT140, HT160, HT170, HT180
Same day
-
You can add up to 6 items per a category to the compare list.
Rapid Heating Soldering Iron Presto (Ceramic Heater-type)
HAKKO CORPORATION
[Features]
· 130W rapid heating when switched on.
· Normally operates at 20W, but will heat using 130W power when the switch is pressed.
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Solid State Relay For Heaters G3PJ
OMRON
A Value Design for Panel product that increases the value of your control panels.
Single-phase SSR for low heat generation enables carrying 25 A (G3PJ-□25B(-PU)) even for close mounting of 3 SSRs to contribute to downsizing of control panels.
Models available with push-in input terminals.
■ Features
· Easier designing and wiring while maintaining the previous 22.5‑mm width to help save space
Size reductions in solid state relays mean you can downsize control panels and cooling equipment,
and support for close mounting helps you save even more space.
· Better temperature characteristics and reinforced insulation for international standard compliance
UL-listed components, so you can reduce the time required for the UL application process.
Using new components or upgraded components is easy.
You can procure the components even when an urgent need arises for adjustments or problem-solving.
· Push-In Plus terminal blocks for easy wiring
Just insert wires: no tools required.
Now you can use Push-In Plus terminals to reduce the time and work involved in wiring.
Same day
-
You can add up to 6 items per a category to the compare list.
Compact Hot Air Heater SAH Series (Standard Output Type)
TOHOKUDENSHI
Can be used freely from room temperature to high temperature ranges (maximum 800°C). Combination of compact body and various "blow-out nozzle shapes" to deliver heaters that meet your needs from local heating to wide area heating.
[Features]
· Longer lifespan heater with improved durability.
· Optional overheating prevention sensor. The sensor for preventing overheating is fixed to the heater body. Prevents heater runaway when thermocouple for temperature control fails and when wire or temperature controller fails.
· A wide variety of hot air blowing nozzles can be designed and manufactured. There are 2 types of nozzles used to control the flow of hot air: glass processing and metal processing. Can design and manufacture if you can specify the desired nozzle shape.
[Applications]
· Used for heating heat shrink tubes.
· Used for curing and drying of adhesives and coatings.
· Used for soldering, preheating of circuit boards and components.
· Used for heating the resin of winding coil.
· Used for joining resin tubes.
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Soldering iron with nichrome heater tip "Junior"
HAKKO CORPORATION
[Features]
·For a wide range of applications, from simple electronic product repair to repair of copper and stainless steel products as well as sheet metal.
·Uses a large copper tip with excellent heat conduction.
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Solid State Contactor For Heater G3PE (Three-Phase)
OMRON
· Compact, slim type with integrated heat sink.
· Solid state contactor for three-phase heater.
· Allows DIN rail mounting, helping to reduce installation work. (DIN rail mounting type)
[Features]
· Surge pass function improves surge dielectric strength of the output circuit. (In manufacturer's test conditions)
· Slim design with three-phase integrated construction.
· Available as DIN rail mounting type or screw mounting type.
· DIN rail mounting type allows DIN rail mounting as standard. (Compatible DIN rail: TR35-15Fe (IEC60715))
· UL, CSA and EN standard compliant (TÜV certified).
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
![Temperature Controller (Digital Control Meter) (22.5 mm Width, DIN Rail-Mounted Type) [E5DC/E5DC-B]](//th.misumi-ec.com/en/linked/material/mech/OMR1/PHOTO/221005345596.jpg?$search_view_b$)
Until 31/03/2025
Until 31/03/2025Temperature Controller (Digital Control Meter) (22.5 mm Width, DIN Rail-Mounted Type) [E5DC/E5DC-B]
OMRON
Ideal DIN rail mounting type for system that connects the touch panel / PLC to the temperature controller while maintaining the operability and high performance of the E5□C series.
[Features]
· A slim body that fits in a low-profile control panel with a DIN rail mounting type that has a depth of 85 mm and a width of 22.5 mm.
· Easy-to-replace terminal block with attachable/detachable structure for easy maintenance.
· Compatible with high-speed heating application by high-speed sampling of 50 ms.
· Easy connection with PLC by program-less communication.
· By connecting to a PC using a communication cable (sold separately), settings can be made without power supply wiring. Easily configurable via CX-Thermo (sold separately).
· Enhanced basic functions of auxiliary output (up to 2 points) and event input (up to 1 point).
· Easy-to-read white PV display (8.5 mm PV height) makes it easy to check the startup and abnormalities even inside the panel.
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Temperature Controller (Outer Diameter 48 × 48 mm / Outer Diameter 96 × 96 mm)
MISUMI
Temperature Regulators - Standard Units
Temperature controllers are devices used to adjust the temperature of the controlled device to the set target temperature
[Feature]
● Dimension (Width X Length X Depth) (mm.)
MTCTR, MTCTRD, MTCTS and MTCTSD - 48 x 48 x 83
MTBGR and MTBGS - 96 x 96 x 86
● Input : Thermocouple (K, J, R, T, N, S, B) and Resistance thermometer (Pt100Ω / JPt100Ω.)
● Output : Relay contact output or SSR drive output
● Power Supply Voltage : AC100 ~ 240V
[Application]
It is used to adjust the temperature of the controlled device to the set target temperature
Same day
-
You can add up to 6 items per a category to the compare list.
Heat Resistant Cable, NiwGB, Glass Braided Cable
ISHIKAWATOKUSHU
[Features]
• Glass fiber is well known as a high temperature insulating material and for having excellent heat resistance and electrical insulation properties. However, as it is hygroscopic, silicone varnishes are often applied and baked on its surface.
· Widely used as a lead wire for electric heater equipment or as wiring material for high temperature equipment.
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
TGK
[Features]
· Just lightly press down the table to create a strong seal.
· Seals 2 mm and 5 mm wide can be produced by swapping the heater wire (both heater wires are supplied with the product).
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Bare Solderless Terminal (K Type) for Rectangular Copper Wire.【50-400 Pieces Per Package】
DAIDO SOLDERLESS TERMINAL
Bare solderless terminal for rectangular copper wire (K type)
[Features]
· Terminal specialized for connecting square wires.
· Original products that do not exist in other companies.
[Application]
· A terminal that is designed for connection between a rectangular copper wire and a terminal block (or copper bar).
· A large number of variations can be selected for sq according to the electric wire and screw hole diameter according to the terminal block screw.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Rod Terminal For 2 Wires (Ferrule) With Insulation Sleeve
PHOENIX CONTACT
[Features]
· Optimal for transition wiring, etc.
Prevents core wires from becoming loose. Inserts into single-wire compatible terminal blocks, improving reliability.
Can simultaneously crimp two wires.
The insulation sleeves are color coded, making it easy to distinguish wires by size.
Same day
-
You can add up to 6 items per a category to the compare list.
UL3265 UL Standard Lead Free Irradiated Cross-Linked Flame Retardant PE Cable
HITACHI CABLE
• UL3265 type /UL (Underwriters Laboratories Inc.) standard supported
• Lead free irradiated cross-linked flame-retardant PE insulation as RoHS complied wires.
• Hitachi specification：SP23-90775F
• Appliance Wiring Material UL 758, CSA C22.2 No.210.2
• Flammability VW-1, FT1, -F
• 150V cable for flame retardant.
• Operating temperature range 125℃.
• Application Internal wiring for hair dryers and small electric heaters.
• Size range: 30～20AWG
• Insulation color: Black, White, Red, Green, Yellow, Blue, Brown, Orange, Gray, Violet, Pink, Light blue
• Can order cable for 1 size of length 610m.
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
![Temperature Controller (Digital Control Meter) [E5EC/AC]](//th.misumi-ec.com/en/linked/material/mech/OMR1/PHOTO/221005345620.jpg?$search_view_b$)
Until 31/03/2025
Until 31/03/2025Temperature Controller (Digital Control Meter) [E5EC/AC]
OMRON
Large white PV display realizes high visibility. Seeks ease of use from selection to operation and setting. Push-in Plus terminal block type lineup added to 48 × 96 mm size.
[Features]
· A white PV displays of height of 25 mm (E5AC) and 18 mm (E5EC/E5EC-B) have been adopted to improve readability.
· Achieves high-speed sampling of 50 ms.
· In addition to the screw terminal block, the 48 × 96 mm size can be selected from the push-in Plus terminal block type that reduces wiring work.
· Slim body with depth of 60 mm (screw terminal block type).
· PLC and easy connection achieved by program-less communication function. Temperature adjustment can also be linked by component communication.
· Equipped with a tool port on the front as well as the top of the main body, settings can be done without power wiring by connecting to a PC using a communication conversion cable (sold separately). Easily configurable via CX-Thermo (sold separately).
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Round Type (R Type) Naked Crimp Terminal For Copper Wire【5-100 Pieces Per Package】
NICHIFU TERMINAL INDUSTRIES
A naked crimp terminal with a round contact surface (tongue section) and mounting holes for screw fixing. Use within the wire joining range.
[Features] Dedicated for copper wires.
· Each specification, namely the crimp terminal wire joining range and performance, supports JIS standard wiring (IV, KIV, VSF).
[Material] Terminal: oxygen-free copper (C1020) / tin electroplated
Same day
![Temperature Controller (Digital Control Meter) (22.5 mm Width, DIN Rail-Mounted Type) [E5DC/E5DC-B]](http://th.misumi-ec.com/en/linked/material/mech/OMR1/PHOTO/221005345596.jpg?$search_view_b$)
![Temperature Controller (Digital Control Meter) [E5EC/AC]](http://th.misumi-ec.com/en/linked/material/mech/OMR1/PHOTO/221005345620.jpg?$search_view_b$)
Loading...
Category
2 items
Loading...
Loading...
Full Text Search
Loading...
Technical Information
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?